VoxelMods x SA Ramses Cable Collab!

By Updates No Comments

By popular demand, I’ve teamed up with the amazing VoxelMods to bring you a really great custom coiled cable group buy to complement your SA Ramses build!

The cable comes in dark RANGER GREEN coil MDPC-X with black Techflex as the device cable, with a HIGHLAND GREEN cerakoted aviator OR Weipu SA10, finished off with a contrasting host cable using VANILLA SANDS under White-Gold MDPC-X.

The colour combination is fixed, with a gold plated USB-C/-A with a clear heatshrink, but you will get to choose the type of  detachable connector your cable has, whether or not you would like it coiled, and the orientation of the coil.

Option 1

$85

Highland Green Cerakoted GX16 Aviator
6 in. coiled cable in Ranger Green and Black Techflex (USB-C)
5 ft. host cable in Vanilla Sands (USB-A)
Clear heatshrink
Gold-plated USB connectors
Choose left or right exit orientation

Option 2

$105

Highland Green Cerakoted Weipu SA10 Connector
6 in. coiled cable in Ranger Green and Black Techflex (USB-C)
5 ft. host cable in Vanilla Sands (USB-A)
Clear heatshrink
Gold-plated USB connectors
Choose left or right exit orientation

Option 3

$45

Highland Green Cerakoted GX16 Aviator
7 in. straight cable in Ranger Green and Black Techflex (USB-C)
5 ft. host cable in Vanilla Sands (USB-A)
Clear heatshrink
Gold-plated USB connectors

Option 4

$65

Highland Green Cerakoted Weipu SA10 Connector
7 in. straight cable in Ranger Green and Black Techflex (USB-C)
5 ft. host cable in Vanilla Sands (USB-A)
Clear heatshrink
Gold-plated USB connectors

THOK Brass Knob/Keycap Collaboration

By Updates No Comments

It’s been awhile in the making but I’m super happy to announce that our THOK collab is now live! We have a brass cap with a colourshift scarab to reflect the subtle beauty of that lil critter, but more importantly I want to highlight the ENCODER KNOB.

I’ve always wanted a lovely fancy knob for my keyboards (and I have a fair few with an encoder knob), but the market is so limited in offering nice knobs that I decided it was high time to get things moving. I hope that even if you don’t like SA Ramses for reasons – mostly I hear the reason is SA is too high – you can still get this knob to go with any other build!

This is a solid brass 18mm wide encoder knob, finished in PVD plating and engraved with an Eye of Ra. It’s also been specially designed to have a universal fit around any rotary encoder, without any side screws. Our MOQ for this is set at 200 so it’s going to be a fun challenge, but I believe we can make it!

Vendors

Canada: Ashkeebs
Europe: MyKeyboard
SEA: Monokei
Asia: zFrontier (free rest of the world shipping above $100)
Australia: Daily Clack

Or purchase from the THOK Official Store!
THOK Ramses Scarab Artisan
THOK Ramses Eye of Ra Encoder Knob

SA Ramses live!

By Updates No Comments

Hi everyone! SA Ramses is finally live and I couldn’t be more relieved! I was working non stop over the past few days fixing the renders… read on if you want the full story, or skim through, it’s your call 😛

Basically if you didn’t realise, the page with all the board combinations is gone because I had to redo my renders completely. This is because we wanted people to be fully informed of the product they’re purchasing, and I was told that my renders were not true to the real life colours that I had chosen.

This is TRUE. My old renders were kind of not really accurate but I closed one eye because I didn’t trust my monitor – I didn’t want to render something that looks perfect on my monitor because it won’t look the same on anyone else’s. So I used RAL’s official hex colour to represent what I chose in real life and stuck with it for consistency, which was a mistake! What a noob! Good news though, I was told that the colours on an iPad are pretty accurate, and good thing I have that. So I did a little comparison of the renders on my iPad to the colour chips I have on hand, and with the help of Omnitype, we managed to fix the renders! They’re now colourmatched to the best of my ability.

This also means that I need to do a LOT of re-rendering in the coming days just to market the correct colours properly, because all the old renders don’t apply anymore. I do hope that everyone who has supported me so far has a good look at the images shown on the product pages and not the old images I’d been posting – if you see an old render, or the renders on Maschine’s Geist or on the Aaru – these images are not colour matched and do not reflect the final colours. Stick to what you see on the product pages! Everything else is just eye candy!

Pricing

Head over to the BUY PAGE to view the full list of prices!

THOK

Super excited to unveil our collab with THOK – matte PVD with a subtle purple/green colourshift infill on the scarab!

Group buy April 16 – May 14 2021

By Updates No Comments

GUYS!!! We’re gonna be live in a little less than two weeks! This is just going to be a tiny update because the prices are not finalised yet. Also the deskmats have juuuust been finished so the renders are not ready. But I’m really excited, I hope y’all are too! Keep an eye out!